FUJITSU SOFTUNE F2 MC-16 - Manual (Page 276)

262
CHAPTER 2 DEPENDENCE FUNCTIONS
2.5.6.4 Display Format of Trace Data
The trace data display format can be selected by running the SHOW TRACE command
with a command modifier specified. If setup is completed with the SET SOURCE
command so as to select a source line addition mode, a source line is attached to the
displayed trace data.
There are three formats to display trace data:
• Display without analyzing trace data (Specify /RAWDATA.)
• Display in instruction execution order (Specify /INSTRUCTION.)
• Display in source line units (Specify /SOURCE.)
■
Display without Analyzing Trace Data (Specify /RAWDATA.)
The frame output by the emulator is not analyzed and it displays it as it is.
The display of the source is done and corked in this mode regardless of the setting by the SET SOURCE
command.
Special frame is as follows.
Break at "address": Displays address which program execution is stopped.
Trace ON code(data) hit: Indicates that trace acquisition is started.
Trace OFF code(data) hit: Indicates that trace acquisition is stopped.
>SHOW TRACE /RAWDATA -2400
frame no. address data(mnemonic) time stamp
- 02400 : DF02B3 BRA DF0296 - > DF0296 1
- 02399 : write 0010 at 004A32
- 02398 : read 0010 at 004A32 8
- 02397 : DF029B BGE DF02B5 - > DF02B5 [INT] 3
- 02396 : DF02BC == << Trace ON code hit >> == 10
- 02395 : write 0000 at 0001A0 0
- 02394 : write 0000 at 004A32 2
- 02393 : read /DMA
0000 at 004A32 2
- 02392 : read 0000 at 0001A2 6
- 02391 : DF02C4 BRA DF02CA - > DF02CA 1
- 02390 : write 0001 at 0001A2 1
- 02389 : ==== << Break at DF02CA >> =====
- 02388 :
DF02CA MOV A,#10
Data
Frame Number
Decimal,
signed
Time Stamp Disassemble Description
Displays difference of executed time
between this frame and next frame
(decimal).
The unit is cycle. Indicates instruction executed.
Hexadecimal
Interrupt
Branching by hardware
interrupt
Jump address
Hexadecimal Branch
destination address
of branch instruction
Data access
read : Read access to internal memory
write : Write access to internal memory
/DMA: DMA access
(No indication means CPU access.)