FUJITSU SOFTUNE F2 MC-16 - Manual (Page 175)

161
CHAPTER 2 DEPENDENCE FUNCTIONS
2.3.4.8 External Trigger Break
It is a function to abort the execution of the program when an external signal is input
from TRIG pin that the emulator has.
■
External Trigger Break
It is a function to abort the execution of the program when an external signal is input from TRIG pin that the
emulator has.
When a break occurs due to an external trigger break, the following message is displayed on the Status Bar.
Break at Address by external trigger break
■
Setting Method
The external trigger break is controlled by the following method.
• Command
- SET TRIGGER
Refer to "3.42 SET TRIGGER" in "SOFTUNE Workbench Command Reference Manual".
• Dialog
- Debugging environment set dialog [emulation] tab
Refer to "4.7.2.3 Debug Environment" in "SOFTUNE Workbench Operation Manual".