FUJITSU SOFTUNE F2 MC-16 - Manual (Page 241)

227
CHAPTER 2 DEPENDENCE FUNCTIONS
■
Displaying All Machine Cycles
Detailed information at all sampled machine cycles can be displayed.
In this mode, no source is displayed irrespective of the setup defined by the SET SOURCE command.
[Example]
>SHOW TRACE/CYCLE -587
frame no. address data a-status d-status Qst dfg
-00587 : FF0106 0106 --- ------- FLH
-00586 : FF0106 0008 ECF EXECUTE --- @
-00585 : FF0106 0106 --- EXECUTE ---
-00584 : 1010E8 10E8 --- ------- ---
-00583 : 1010E8 0102 EWA EXECUTE --- @
-00582 : 1010E8 0102 --- EXECUTE ---
-00581 : 000186 0186 --- ------- 2by
-00580 : 000186 10F2 IRA EXECUTE --- @
-00579 : 1010E6 10E6 --- ------- ---
-00578 : 1010E6 10F2 EWA EXECUTE --- @
-00577 : 1010E6 10F2 --- EXECUTE ---
-00576 : 000186 0186 --- ------- ---
Data Access
internal read access : Read access to
internal memory
internal write access : Write access to
internal memory
external read access : Read access to
external memory
external write access : Write access to
external memory
>SHOW TRACE /INSTRUCTION -194
step no. address mnemonic
\sub4:
-00194 : FF0106 LINK # 00
-00193 : 000186 internal read access. 10F2
-00192 : 1010E6 external write access. 10F2
-00191 : 000186 internal write access. 10E6
-00190 : FF0108 ADDSP #F8
-00189 : FF010A MOVL A,001A
-00188 : 10001A external read access. 0000
-00187 : 10001C external read access. 4000
-00186 : FF010E MOVL @SP+04,A
-00185 : 1010E2 external write access. 0000
-00184 : FF0111 MOVL A,0016 5
-00183 : ** RESET **
>
Step Number
Address Disassemble Description
Data
Device Status
Decimal number,
Hexadecimal
Indecates instruction
executed
Hexadecimal
** STANDBY ** : Hardware standby
** RESET ** : Reset
** THOLD ** : Tool hold
** UHOLD ** : User hold
** WAIT ** : Ready pin input
** SLEEP ** : Sleep
** STOP ** : Stop
number
signed
number