Siemens S223 - Manual (Page 103)

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 103
configure one of two as default OS what user wants.
In hiD 6615 S223/S323, a system image saved in os1 is configured as default OS by
default.
To desgnate a default OS, use the following command.
Command Mode Description
default-os {os1 | os2} Enable Desgnates default OS of switch.
6.3.16 Switch Status
To display temperature of switch, power status, and fan status, use the following
command.
Command Mode Description
show status fan Shows fan status of switch.
show status power Shows power status.
show status temp
Enable
Global
Bridge
Shows temperature of switch.
6.3.17 Tech Support
In hiD 6615 S223/S323, you can display the configuration and configuration file, log
information, register, memory, debugging information using the following commands. By
checking tech supporting, check the system errors and use it for solving the problem.
Command Mode Description
tech-support {all | crash-info}
console
Check tech support on console.
tech-support {all | crash-info}
remote IP-ADDRESS {ftp | tftp}
Enable
Save the contents of tech support in a specified ad-
dress.
Tech support contents displayed on console are showed at once regardless of the num-
ber of display lines of terminal screen.
!