Siemens S223 - Manual (Page 63)

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 63
To configure authentication key in the hiD 6615 S223/S323, use the following command.
Command Mode Description
ssh keygen {rsa1 | rsa | dsa} Global
Configures authentication key.
rsa1: SSH ver. 1 public key for the authentication
rsa: SSH ver. 2 public key for the authentication
dsa: SSH ver. 2 public key for the authentication
To configure authentication key and connect to SSH server with the authentication key,
perform the following procedure.
Step 1
Configure the authentication key in the switch.
SWITCH_A(config)# ssh keygen dsa
Generating public/private dsa key pair.
Enter file in which to save the key (/etc/.ssh/id_dsa):
Enter passphrase (empty for no passphrase):networks
Enter same passphrase again:networks
Your identification has been saved in /etc/.ssh/id_dsa.
Your public key has been saved in /etc/.ssh/id_dsa.pub.
The key fingerprint is:
d9:26:8e:3d:fa:06:31:95:f8:fe:f6:59:24:42:47:7e root@hiD6615
SWITCH_A(config)#
Step 2
Connect to SSH server with the authentication key.
SWITCH_A# ssh login 172.16.209.10
Enter passphrase for key '/etc/.ssh/id_dsa': networks
SWITCH_B#
To display the configured authentication keys in the hiD 6615 S324, use the following
command.
Command Mode Description
show key-list
Enable
Global
Shows an authentication key of SSH server.