Siemens S223 - Manual (Page 53)

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 53
To specify a timeout value, use the following command.
Command Mode Description
login tacacs timeout <1-100> Global
Specifies a timeout value.
1-100: waiting-time for the response (default: 3)
4.2.5.4 Additional TACACS+ Configuration
The hiD 6615 S223/S323 provides several additional options to configure the system au-
thentication via TACACS server.
TCP Port for the Authentication
To specify TCP port for the system authentication, use the following command.
Command Mode Description
login tacacs socket-port
<1-65535>
Specifies TCP port for the authentication.
1-65535: TCP port
no login tacacs socket-port
Global
Deleted the configured TCP port for the authentication
Authentication Type
To select the authentication type for TACACS+, use the following command.
Command Mode Description
login tacacs auth-type {ascii |
pap | chap}
Selects the authentication type for TACACS+.
ascii: plain text
pap: password authentication protocol
chap: challenge handshake authentication protocol
no login tacacs auth-type
Global
Deletes a specified authentication type.
Priority Level
You can define a priority level of user. According to the defined priority level, the user has
different authorization to access the DSLAM. This priority must define in the TACACS
server in the same way.
To define the priority level of user, use the following command.
Command Mode Description
login tacacs priority-level {min |
user | max | root}
Defines the priority level of user, refer the below infor-
mation for the order of priority.
no login tacacs priority-level
Global
Deletes a defined priority level.
The order of priority is root = max > user > min.
i