Siemens S223 - Manual (Page 118)

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
118 A50010-Y3-C150-2-7619
To display a configured severity of alarm, use the following commands.
Command Mode Description
show snmp alarm-severity
Enable
Global
Shows a configured severity of alarm.
To deletes a recorded alarm in the system, use the following command.
Command Mode Description
snmp clear alarm-history
Enable
Global
Deletes a recorded alarm in the system.
The following is an example of showing the transmitted alarm and delete the records.
SWITCH(config)# show snmp alarm-history
cold-start minor Fri Mar 25 15:30:56 2005 System booted.
SWITCH(config)# snmp clear alarm-history
SWITCH(config)# show snmp alarm-history
SWITCH(config)#
To display a current alarm report, use the following command.
Command Mode Description
show snmp alarm-report
Enable
Global
Shows a current alarm report.
To deletes a recorded alarm report in the system, use the following command.
Command Mode Description
snmp clear alarm-report
Enable
Global
Deletes a recorded alarm report in the system.
7.1.11 Disabling SNMP
To disable SNMP feature, use the following command.
Command Mode Description
no snmp Global Disables SNMP feature.
When you use the above command, all configurations concerning SNMP will be deleted.
!