Siemens S223 - Manual (Page 172)

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
172 A50010-Y3-C150-2-7619
To configure the limited ICMP transmission time, use the following command.
Command Mode Description
ip icmp interval rate-limit IN-
TERVAL
Global
Configures a limited ICMP transmission time.
INTERVAL: 0-2000000000 (unit: 10 ms)
The default ICMP interval is 1 second (100 ms).
To return to default ICMP configuration, use the following command.
Command Mode Description
ip icmp interval default Global Returns to default configuration.
To display ICMP interval configuration, use the following command.
Command Mode Description
show ip icmp interval
Enable
Global
Shows ICMP interval configuration.
7.14.3 Transmitting ICMP Redirect Message
User can configure to transmit ICMP Redirect Message. Transmitting ICMP Redirect
Message is one of the ways preventing DoS(Denial of Service), and this can make the
switch provide the constant service to the hosts.SURPASS hiD 6615 transmits more op-
timized route to the host than the present route between the host connected to the switch
and the specific destination.
To activate the function transmitting ICMP Redirect Message, use the following command.
Command Mode Description
ip redirects
Activates the function transmitting ICMP Redirect
Message
no ip redirecs
Global
Deactivates the function transmitting ICMP Redi-
rect Message.
i