Siemens S223 - Manual (Page 20)

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
20 A50010-Y3-C150-2-7619
1 Introduction
1.1 Audience
This manual is intended for SURPASS hiD 6615 S223/S323 single-board Fast Ethernet
switch operators and maintenance personnel for providers of Ethernet services. This
manual assumes that you are familiar with the following:
•
Ethernet networking technology and standards
• Internet topologies and protocols
• Usage and functions of graphical user interfaces.
1.2 Document Structure
Tab. 1.1 briefly describes the structure of this document.
Chapter Description
1 Introduction Introduces the overall information of the document.
2 System Overview
Introduces the hiD 6615 S223/S323 system. It also lists the features
of the system.
3 Command Line Interface (CLI) Describes how to use the Command Line Interface (CLI).
4 System Connection and IP Address Describes how to manage the system account and IP address.
5 Port Configuration Describes how to configure the Ethernet ports.
6 System Environment
Describes how to configure the system environment and manage-
ment functions.
7 Network Management Describes how to configure the network management functions.
8 System Main Functions Describes how to configure the system main functions.
9 IP Multicast. Describes how to configure the IP multicast packets.
10 IP Routing Protocol. Describes how to configure IP routing protocol.
12 Abbreviations
Lists all abbreviations and acronyms which appear in this docu-
ment.
Tab. 1.1 Overview of Chapters