Siemens S223 - Manual (Page 329)

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 329
Command Mode Description
clear ip bgp <1-65535> soft [in |
out ]
clear ip bgp <1-65535> ipv4
{unicast | multicast} soft [in |
out ]
Global
Updates the route information only while the session is
possible of BGP neighboring routers which are config-
ured a particular AC number. Apply the route either
incoming or outgoing routes.
1-65535: AS number
10.1.5.3 Session Reset of Specific Route
To reset the sessions of BGP neighboring router with specified IP address, use the follow-
ing command.
Command Mode Description
clear ip bgp ROUTE-IP-
ADDRESS
Global
Resets the sessions of BGP neighboring router with
specified IP address.
See Section 10.1.5.1 when you configure the detail parameters.
To reset the sessions of BGP neighboring router with specified IP address and initialize
the details of route configurations, use the following command.
Command Mode Description
clear ip bgp A.B.C.D in [prefix-
filter ]
clear ip bgp A.B.C.D ipv4 {uni-
cast | multicast} in [prefix-filter]
Resets the session of BGP neighboring router con-
tained specified IP address.
in: clears incoming advertised routes.
prefix-filter: pushes out prefix-list ORF and does in-
bound soft reconfiguration.
A.B.C.D: route IP address
clear ip bgp A.B.C.D out
clear ip bgp A.B.C.D ipv4 {uni-
cast | multicast} out
Resets the session of BGP neighboring router with
specified IP address.
A.B.C.D: route IP address
out: clears outgoing advertised routes.
unicast | multicast: address family modifier
clear ip bgp A.B.C.D soft [in |
out ]
clear ip bgp A.B.C.D ipv4 {uni-
cast | multicast} soft [in | out]
Global
Updates the route information only while the session is
possible of BGP neighboring router with specified IP
address. Apply the route either incoming or outgoing
routes.
A.B.C.D: route IP address
10.1.5.4 Session Reset of External Peer
You can reset the session of BGP router connected to external AS. To reset a BGP con-
nection for all external peers, use the following command.
Command Mode Description
clear ip bgp external Global Resets the session of all external AS peers.
i