5 syslog, 1 syslog output level, Syslog – Siemens S223 User Manual
Page 135: Syslog output level
User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 135
7.5 Syslog
The syslog is a function that allows the network element to generate the event notification
and forward it to the event message collector like a syslog server. This function is enabled
as default, so even though you disable this function manually, the syslog will be enabled
again.
This section contains the following contents.
•
•
•
•
•
•
Displaying Syslog Configuration
7.5.1
Syslog Output Level
Syslog Output Level without a Priority
To set a syslog output level, use the following command.
Command Mode
Description
syslog output
{emerg | alert | crit
| err | warning | notice | info |
debug
} console
Generates a syslog message of selected level or
higher and forwards it to the console.
syslog output
{emerg | alert | crit
| err | warning | notice | info |
debug
} local {volatile | non-
volatile
}
Generates a syslog message of selected level or
higher in the system memory.
volatile: deletes a syslog message after restart.
non-volatile: reserves a syslog message.
syslog output
{emerg | alert | crit
| err | warning | notice | info |
debug
} remote IP-ADDRESS
Global
Generates a syslog message of selected level or
higher and forwards it to a remote host.
To disable a specified syslog output, use the following command.
Command Mode
Description
no syslog output
{emerg | alert |
crit
| err | warning | notice | info |
debug
} console
no syslog output
{emerg | alert |
crit
| err | warning | notice | info |
debug
} local {volatile | non-
volatile
}
no syslog output
{emerg | alert |
crit
| err | warning | notice | info |
debug
} remote IP-ADDRESS
Global
Deletes a specified syslog output.