Siemens S223 - Manual (Page 300)

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
300 A50010-Y3-C150-2-7619
To delete the statically configured MVR group address, use the following command.
Command Mode Description
no mvr vlan VLAN helper Global
Deletes a MVR group address.
IP ADDRESS: specific IP address
9.2.7.4 Send and Receive Port
Statically configure a VLAN interface to receive multicast traffic sent to the multicast
VLAN and the IP multicast address. An interface statically configured as a member of a
group remains a member of the group until statically removed.
Command Mode Description
mvr port PORTS type {receiver |
source }
Global
Configures MVR port.
PORTS: port number
• Source
This configures uplink ports that receive and send multicast data as source ports.
Subscribers cannot be directly connected to source ports. All source ports on a switch
belong to the single multicast VLAN.
• Receiver
This configures a port as a receiver port if it is a subscriber port and should only re-
ceive multicast data. It does not receive data unless it becomes a member of the
multicast group, either statically or by using IGMP leave and join messages. Receiver
ports cannot belong to the multicast VLAN.
To delete the statically configured MVR port, use the following command.
Command Mode Description
no mvr port PORTS Global Deletes a MVR port.
9.2.7.5 Displaying MVR Configuration
To display an MVR configuration, use the following command.
Command Mode Description
show mvr
show mvr port
show mvr vlan VLANS
Enable
Global
Shows a configuration.
9.2.8 IGMP Filtering and Throttling
With the IGMP filtering feature, you can filter multicast joins on a per-port basis by config-
uring IP multicast profiles and associating them with individual switch ports. An IGMP pro-
file can contain one or more multicast groups and specifies whether access to the group
is permitted or denied. If an IGMP profile denying access to a multicast group is applied
to a switch port, the IGMP join report requesting the stream of IP multicast traffic is