Siemens S223 - Manual (Page 372)

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
372 A50010-Y3-C150-2-7619
command.
Command Mode Description
recv-buffer size <8196-
2147483647>
Sets the UDP Buffer size value for using RIP.
8196-2147483647: UDP buffer size value
no recv-buffer size <8196-
2147483647>
Router
Restore the default value of UDP buffer size.
10.3.16 Monitoring and Managing RIP
You can display specific router information such as the contents of IP routing tables, and
databases. Information provided can be used to determine resource utilization and solve
network problems. You can also discover the routing path your router’s packets are taking
through the network.
To display RIP information, use the following command.
Command Mode Description
show ip rip Shows RIP information being used in router.
show ip route rip Shows a routing table information involved in RIP.
show ip protocols [rip]
Enable
Global
Shows a current status of RIP protocol and its informa-
tion.
To quickly diagnose problems, the debug command is useful for customers. To display in-
formation on RIP routing transactions or debugging information, use the following com-
mand.
Command Mode Description
debug rip events
Shows RIP event such as packet transmit and sending
and changed RIP information.
debug rip packet [recv | send]
debug rip packet [recv | send]
detail
Shows more detailed information about RIP packet.
The information includes address of packet transmis-
sion and port number.
show debugging rip
Enable
Global
Shows all information configured for RIP debugging.