Siemens S223 - Manual (Page 175)

User Manual UMN:CLI
SURPASS hiD 6615 S223/S323 R1.5
A50010-Y3-C150-2-7619 175
7.16.1.1 Packet Dump by Protocol
You can see packets about BOOTPS, DHCP, ARP and ICMP using the following com-
mand.
Command Mode Description
debug packet {interface INTER-
FACE | port PORTS} protocol
{bootps | dhcp | arp | icmp} {src-
ip A.B.C.D | dest-ip A.B.C.D}
Shows packet dump by protocol.
debug packet {interface INTER-
FACE | port PORTS} host {src-ip
A.B.C.D | dest-ip A.B.C.D} {src-
port <1-65535> | dest-port <1-
65535>}
Shows host packet dump.
debug packet {interface INTER-
FACE | port PORTS} multicast
{src-ip A.B.C.D | dest-ip A.B.C.D}
Shows multicast packet dump.
debug packet {interface INTER-
FACE | port PORTS} src-ip
A.B.C.D | dest-ip A.B.C.D}
debug packet {interface INTER-
FACE | port PORTS} dest-ip
A.B.C.D
Enable
Show packet dump by source IP address or destination
IP address.
7.16.1.2 Packet Dump with Option
You can verify packets with TCP dump options using the following command.
Command Mode Description
debug packet OPTION Enable Shows packet dump using options.