Siemens S223 - Manual (Page 280)

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
280 A50010-Y3-C150-2-7619
9.1.3 Clearing MRIB Information
Clearing Total or Partial Group Entry of MRIB
If you use the clear ip mroute command, the MRIB clears the multicast route entries in
its multicast route table, and removes the entries from the multicast forwarder. Each mul-
ticast protocol has its own clear multicast route command. The protocol-specific clear
command clears multicast routes from the protocol, and also clears the routes from the
MRIB.
To delete the multicast route entries, use the following command.
Command Mode Description
clear ip mroute * Deletes all multicast routes entries.
clear ip mroute GROUP-ADDR
[SRC-IP-ADDRESS]
Enable
Global
Bridge
Deletes specific multicast routes entries.
GROUP-ADDR: group IP address
SRC-IP-ADDRESS: source IP address
Clearing Statistics of Multicast Routing Table
To delete the multicast route statistics entries from IP multicast routing table, use the fol-
lowing command.
Command Mode Description
clear ip mroute statistics *
Deletes all multicast routes statistics
entries.
clear ip mroute statistics GROUP-ADDR [SRC-
IP-ADDRESS ]
Enable
Global
Bridge
Deletes specific multicast routes statis-
tics entries.
GROUP-ADDR: group IP address
SRC-IP-ADDRESS: source IP address
Clearing MFC and Tree Information Base which are produced by PIM-SM
To clear all Multicast Forwarding Cache (MFC) and TIB entries in the PIM-SM protocol
level, use the following command.
Command Mode Description
clear ip mroute * pim sparse-
mode
Deletes all MFC and TIB entries in the PIM-SM.
clear ip mroute GROUP-ADDR
[SRC-IP-ADDRESS] pim sparse-
mode
Enable
Global
Deletes specific MFC and TIB entries in the PIM-SM.
GROUP-ADDR: group IP address
SRC-IP-ADDRESS: source IP address