Siemens S223 - Manual (Page 164)

UMN:CLI User Manual
SURPASS hiD 6615 S223/S323 R1.5
164 A50010-Y3-C150-2-7619
Command Mode Description
mac-filter add MACADDR
{deny | permit}
Bridge
Allows or blocks packet which brings configured mac
address to specified port.
Variable MAC-ADDRESS is composed of twelve digits number in Hexa decimal. It is pos-
sible to check it by using the show mac command. 00:d0:cb:06:01:32 is an example of
MAC address.
7.12.3 Deleting MAC Filter Policy
To delete MAC filtering policy, use the following command.
Command Mode Description
mac-filter del SOURCE-MACADDR
[<1-4094>]
Bridge Deletes filtering policy for specified MAC address.
To delete MAC filtering function, use the following command.
Command Mode Description
no mac-filter Bridge Deletes all MAC filtering functions.
7.12.4 Listing of MAC Filter Policy
If you need to make many MAC filtering policies at a time, it is hard to input command
one by one. In this case, it is more convenient to save MAC filtering policies at
“/etc/mfdb.conf” and display the list of MAC filtering policy. To view the list of MAC filtering
policy at /etc/mfdb.conf, use the following command.
Command Mode Description
mac-filter list Bridge Shows the list of MAC filtering policy at /etc/mfdb.conf.
7.12.5 Displaying MAC Filter Policy
To show a configuration about MAC filter policy, use the following command.
Command Mode Description
show mac-filter default-policy
show mac-filter
Enable / Global / Bridge Shows MAC filter policy.