UTStarcom PPC-6700 - Manual (Page 46)

Synchronizing Information and Setting Up E-mail Security
|
45
To install and set up ActiveSync
1.
Install ActiveSync on your PC, as described on the Getting Started disc. After Setup
completes, the Sync Setup Wizard automatically starts when you connect your device
to the PC.
2. Follow the instructions on the screen to complete the wizard. In the Sync Setup Wizard,
do one or both of the following:
• Create a synchronization relationship between your PC and the device.
• Configure an Exchange Server connection to synchronize directly with Exchange
Server.
3. Choose information types to synchronize.
Note When you finish the wizard, ActiveSync synchronizes your device automatically. Once
synchronization is complete, you can disconnect your device from your PC.
4.2 Synchronizing Information
When you connect your device to the PC using a USB cable, an infrared connection, or
a Bluetooth connection, ActiveSync will immediately synchronize. While the device is
connected, ActiveSync synchronizes every time you make a change on either the PC or
the device.
Synchronizing Outlook information
If you have set up a synchronization relationship between your device and the PC,
synchronization keeps Outlook information up-to-date on both your device and PC.
ActiveSync synchronizes a limited amount of information by default to save storage space
on your device. You can change the amount of information synchronized for a given
information type in Settings for the information type.