UTStarcom PPC-6700 - Manual (Page 61)

60
|
Managing Your Pocket PC Phone
To set the backlight to dim after a time delay
1.
Tap Start > Settings > System tab > Backlight.
2. Tap the Battery Power tab or the External Power tab.
3. Select the Turn off backlight if device is not used for check box, and specify the
time delay.
Phone settings
You can customize phone settings, such as the ring type and ring tone to be used for
incoming calls, and the keypad tone to be used when entering phone numbers.
To change the ring tone
1.
Tap Start > Settings > Personal tab > Phone > Phone tab.
2. In the Ring tone list, tap the sound you want to use.
Tip To use custom .wav, .mid, or .wma files as ring tones, use ActiveSync on your PC to copy
the file to the /Windows/Rings folder on your device. Then, select the sound from the
Ring tone list. For more information about copying files to your device, see ActiveSync
Help on your PC.
To change the ring type
You can change the way that you are notified of incoming calls. For example, you can
choose to be notified by a ring, a vibration, or a combination of both.
1. Tap Start > Settings > Personal tab > Phone > Phone tab.
2. In the Ring type list, tap the desired option.
To change the keypad tone
You can change the tone you hear when entering a phone number on the keypad. If set
to Long tones, the tone is heard continuously for as long as the number on the keypad is
pressed. Use this setting if you are having trouble accomplishing tasks that rely on tones
from your phone such as accessing messages from an answering machine. If set to Short
tones, the tone is heard only for one or two seconds. If set to Off, no tone will be heard.