UTStarcom PPC-6700 - Manual (Page 78)

Getting Connected
|
77
it whenever you want to use the phone as a modem. Make sure that your device and the
destination device are turned on, Bluetooth is turned on, and that the devices are within
close range.
To accept a Bluetooth partnership
1.
On your device, tap Start > Settings > Connections tab > Connections.
2. Tap Add a new modem connection.
3. Enter a name for the connection.
4. In the Select a modem list, tap Bluetooth.
5. Tap Next.
6. If the device appears in the My Connections list, skip to step 11.
7. If the device does not appear in the My Connections list, tap New Partnership, and
follow the remaining steps.
8. Select the device name from the list and tap Next.
9. Enter a passkey and tap Next.
10. Enter the same passkey on the device and tap Finish.
11. In the My Connections list, tap the device and tap then Next.
12. Enter the phone number to dial for this connection and tap Next.
13. Enter the required logon information for this connection and tap Finish.
You can start using this service for the program that uses the Bluetooth connection, such
as Inbox on your device, to send and receive e-mail, or Internet Explorer to browse the
Web.