ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 129)

ZyWALL 35 User’s Guide
Chapter 6 Wireless LAN and Authentication Server 127
The following fields are only available when you select 802.1x + Dynamic WEP in the
Security drop down list-box.
6.13.5 802.1x + Static WEP
Select 802.1x + Static WEP from the Security list.
Table 33 Wireless: 802.1x + Dynamic WEP
LABEL DESCRIPTION
Security Select WPA from the drop-down list.
ReAuthentication
Timer (Seconds)
Specify how often wireless stations have to reenter usernames and passwords in
order to stay connected. Enter a time interval between 10 and 9999 seconds.
If wireless station authentication is done using a RADIUS server, the
reauthentication timer on the RADIUS server has priority.
Idle Timeout
(Seconds)
The ZyWALL automatically disconnects a wireless station from the wired network
after a period of inactivity. The wireless station needs to enter the username and
password again before access to the wired network is allowed.
Authentication
Databases
Click Local User to go to the Local User Database screen where you can view
and/or edit the list of users and passwords. Click RADIUS to go to the RADIUS
screen where you can configure the ZyWALL to check an external RADIUS server
Dynamic WEP
Key Exchange
Select 64-bit WEP or 128-bit WEP to enable data encryption. Up to 32 stations can
access the ZyWALL when you configure dynamic WEP key exchange.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.