ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 509)

ZyWALL 35 User’s Guide
Chapter 38 System Information & Diagnosis 507
C
H A P T E R
38
System Information & Diagnosis
This chapter covers SMT menus 24.1 to 24.4.
38.1 Introduction to System Status
This chapter covers the diagnostic tools that help you to maintain your ZyWALL. These tools
include updates on system status, port status and log and trace capabilities.
Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown below.
Figure 312 Menu 24: System Maintenance
38.2 System Status
The first selection, System Status, gives you information on the version of your system
firmware and the status and statistics of the ports, as shown in the next figure. System Status is
a tool that can be used to monitor your ZyWALL. Specifically, it gives you information on
your system firmware version, number of packets sent and number of packets received.
To get to the System Status:
1 Enter number 24 to go to Menu 24 - System Maintenance.
2 In this menu, enter 1 to open System Maintenance - Status.
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number: