ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 409)

ZyWALL 35 User’s Guide
Chapter 24 Maintenance 407
24.8.2 Restore Configuration
Restore Configuration allows you to upload a new or previously saved configuration file from
your computer to your ZyWALL.
After you see a “restore configuration successful” screen, you must then wait one minute
before logging into the ZyWALL again.
Figure 219 Configuration Upload Successful
The ZyWALL automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Figure 220 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP address of your
computer to be in the same subnet as that of the default device IP address (192.168.1.1). See
your Quick Start Guide for details on how to set up your computer’s IP address.
Table 146 Restore Configuration
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Browse ... to find it.
Browse... Click Browse... to find the file you want to upload. Remember that you must decompress
compressed (.ZIP) files before you can upload them.
Upload Click Upload to begin the upload process.
Note: Do not turn off the ZyWALL while configuration file
upload is in progress.