ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 569)

ZyWALL 35 User’s Guide
Chapter 44 VPN/IPSec Setup 567
44.4 IKE Setup
To edit this menu, the Key Management field Menu 27.1.1 - IPSec Setup must be set to
IKE. Move the cursor to the Edit Key Management Setup field in Menu 27.1.1 - IPSec
Setup; press [SPACE BAR] to select Yes and then press [ENTER] to display Menu 27.1.1.1
- IKE Setup.
Figure 364 Menu 27.1.1.1: IKE Setup
Key
Management
Press [SPACE BAR] to choose either IKE or Manual and then press [ENTER]. Manual
is useful for troubleshooting if you have problems using IKE key management.
Edit Key
Management
Setup
Press [SPACE BAR] to change the default No to Yes and then press [ENTER] to go to a
key management menu for configuring your key management setup (described later). If
you set the Key Management field to IKE, this will take you to Menu 27.1.1.1 – IKE
Setup. If you set the Key Management field to Manual, this will take you to Menu
27.1.1.2 – Manual Setup.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [ESC] at any time to cancel.
Table 208 Menu 27.1.1: IPSec Setup (continued)
FIELD DESCRIPTION
Menu 27.1.1.1 - IKE Setup
Phase 1
Negotiation Mode= Main
Authentication Method= Pre-Shared Key
PSK= qwer1234
Certificate= N/A
Encryption Algorithm= AES
Authentication Algorithm= SHA1
SA Life Time (Seconds)= 300
Key Group= DH1
Phase 2
Active Protocol= ESP
Encryption Algorithm= AES
Authentication Algorithm= MD5
SA Life Time (Seconds)= 2880
Encapsulation= Tunnel
Perfect Forward Secrecy (PFS)= None
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.