ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 446)

ZyWALL 35 User’s Guide
444 Chapter 28 LAN Setup
Follow the steps below to create the MAC address table on your ZyWALL.
1 From the main menu, enter 3 to open Menu 3 - LAN Setup.
2 Enter 5 to display Menu 3.5 - Wireless LAN Setup.
3 In the Edit MAC Address Filter field, press [SPACE BAR] to select Yes and press
[ENTER]. Menu 3.5.1 - WLAN MAC Address Filter displays as shown next.
Figure 249 Menu 3.5.1: WLAN MAC Address Filter
The following table describes the fields in this menu.
Menu 3.5.1 - WLAN MAC Address Filter
Active= No
Filter Action= Allowed Association
MAC Address Filter
Address 1= 00:00:00:00:00:00
Address 2= 00:00:00:00:00:00
Address 3= 00:00:00:00:00:00
Address 4= 00:00:00:00:00:00
Address 5= 00:00:00:00:00:00
Address 6= 00:00:00:00:00:00
Address 7= 00:00:00:00:00:00
Address 8= 00:00:00:00:00:00
Address 9= 00:00:00:00:00:00
Address 10= 00:00:00:00:00:00
Address 11= 00:00:00:00:00:00
Address 12= 00:00:00:00:00:00
Enter here to CONFIRM or ESC to CANCEL:
Table 166 Menu 3.5.1: WLAN MAC Address Filter
FIELD DESCRIPTION
Active To enable MAC address filtering, press [SPACE BAR] to select Yes and press
[ENTER].
Filter Action Define the filter action for the list of MAC addresses in the MAC address filter table.
To deny access to the ZyWALL, press [SPACE BAR] to select Deny Association
and press [ENTER]. MAC addresses not listed will be allowed to access the router.
The default action, Allowed Association, permits association with the ZyWALL.
MAC addresses not listed will be denied access to the router.
MAC Address
Filter
Address 1..12 Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the client computers
that are allowed or denied access to the ZyWALL in these address fields.
When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm…] to
save your configuration, or press [ESC] at any time to cancel.