ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 248)

ZyWALL 35 User’s Guide
246 Chapter 14 VPN Screens
between three encryption algorithms (DES, 3DES and AES), two authentication algorithms
(MD5 and SHA1) and two key groups (DH1 and DH2) when you configure a VPN rule (
see
the Editing VPN Policies section ). The ID type and content act as an extra level of
identification for incoming SAs.
The type of ID can be a domain name, an IP address or an e-mail address. The content is the IP
address, domain name, or e-mail address.
14.8.1 ID Type and Content Examples
Two IPSec routers must have matching ID type and content configuration in order to set up a
VPN tunnel.
Table 73 Local ID Type and Content Fields
LOCAL ID TYPE= CONTENT=
IP Type the IP address of your computer or leave the field blank to have the ZyWALL
automatically use its own IP address.
DNS Type a domain name (up to 31 characters) by which to identify this ZyWALL.
E-mail Type an e-mail address (up to 31 characters) by which to identify this ZyWALL.
The domain name or e-mail address that you use in the Content field is used for identification purposes
only and does not need to be a real domain name or e-mail address.
Table 74 Peer ID Type and Content Fields
PEER ID TYPE= CONTENT=
IP Type the IP address of the computer with which you will make the VPN connection
or leave the field blank to have the ZyWALL automatically use the address in the
Secure Gateway field.
DNS Type a domain name (up to 31 characters) by which to identify the remote IPSec
router.
E-mail Type an e-mail address (up to 31 characters) by which to identify the remote IPSec
router.
Subject Name Type the subject name (up to 255 characters) by which to identify the remote IPSec
router. This option is available only when you set Authentication Method to
Certificate.
The domain name or e-mail address that you use in the Content field is used for identification purposes
only and does not need to be a real domain name or e-mail address. The domain name also does not
have to match the remote router’s IP address or what you configure in the Secure Gateway Addr field
below.