ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 71)

ZyWALL 35 User’s Guide
Chapter 2 Introducing the Web Configurator 69
Figure 8 Home : Show Statistics
The following table describes the labels in this screen.
2.4.4.1 Show Statistics: Line Chart
Click the icon in the Show Statistics screen. The screen shows you the line chart of each
port’s throughput statistics.
Table 6 Home : Show Statistics
LABEL DESCRIPTION
Click the icon to display the chart of throughput statistics.
Port This is the WAN1, WAN2, Dial Backup, LAN, DMZ or WLAN port.
Status This displays the port speed and duplex setting if you’re using Ethernet
encapsulation and Down (line is down), Idle (line (ppp) idle), Dial (starting to trigger
a call) or Drop (dropping a call) if you’re using PPPoE encapsulation.
TxPkts This is the number of transmitted packets on this port.
RxPkts This is the number of received packets on this port.
Tx B/s This displays the transmission speed in bytes per second on this port.
Rx B/s This displays the reception speed in bytes per second on this port.
Up Time This is the total amount of time the line has been up.
System Up Time This is the total time the ZyWALL has been on.
Poll Interval(s) Enter the time interval for refreshing statistics in this field.
Set Interval Click this button to apply the new poll interval you entered in the Poll Interval(s)
field.
Stop Click Stop to stop refreshing statistics.