ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 67)

ZyWALL 35 User’s Guide
Chapter 2 Introducing the Web Configurator 65
2.4.3 Navigation Panel
After you enter the password, use the sub-menus on the navigation panel to configure
ZyWALL features.
The following table lists the features available for each mode.
Bridge Port This is the port type. Port types are: WAN1, WAN2, LAN, WLAN and DMZ.
Port Status For the WAN, LAN, and DMZ ports, this displays the port speed and duplex setting.
For the WAN port, it displays Down when the link is not ready or has failed. For the
WLAN port, it displays Active when WLAN is enabled or Inactive when WLAN is
disabled.
RSTP Status This is the RSTP status of the corresponding port.
RSTP Active This shows whether or not RSTP is active on the corresponding port.
RSTP Priority This is the RSTP priority of the corresponding port.
RSTP Path Cost This is the cost of transmitting a frame from the root bridge to the corresponding
port.
Show Statistics Click Show Statistics to see bridge performance statistics such as the number of
packets sent and number of packets received for each port, including WAN1,
WAN2, LAN, DMZ and WLAN.
Table 3 Web Configurator HOME Screen in Bridge Mode (continued)
LABEL DESCRIPTION
Table 4 Feature Comparison
FEATURE BRIDGE MODE ROUTER MODE
Internet Access Wizard O
VPN Wizard O
DHCP Table O
System Statistics O O
LAN O
Bridge O
Wireless LAN O O
WAN O
DMZ O
Firewall O O
Content Filter O O
VPN O
Certificates O O
Authentication Server O O
NAT O
Static Route O
Bandwidth Management O O
DNS O