ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 518)

ZyWALL 35 User’s Guide
516 Chapter 38 System Information & Diagnosis
1 From the main menu, select option 24 to open Menu 24 - System Maintenance.
2 From this menu, select option 4. Diagnostic. This will open Menu 24.4 - System
Maintenance - Diagnostic.
Figure 321 Menu 24.4: System Maintenance: Diagnostic
38.5.1 WAN DHCP
DHCP functionality can be enabled on the LAN or WAN as shown in Figure 322 . LAN DHCP
has already been discussed. The ZyWALL can act either as a WAN DHCP client (IP Address
Assignment field in menu 4 or menu 11.3 is Dynamic and the Encapsulation field in menu
4 or menu 11 is Ethernet) or None, (when you have a static IP). The WAN Release and
Renewal fields in menu 24.4 conveniently allow you to release and/or renew the assigned
WAN IP address, subnet mask and default gateway in a fashion similar to winipcfg.
Figure 322 WAN & LAN DHCP
The following table describes the diagnostic tests available in menu 24.4 for your ZyWALL
and associated connections.
Menu 24.4 - System Maintenance - Diagnostic
TCP/IP
1. Ping Host
2. WAN DHCP Release
3. WAN DHCP Renewal
4. Internet Setup Test
System
11. Reboot System
Enter Menu Selection Number:
WAN=
Host IP Address= N/A