ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 131)

ZyWALL 35 User’s Guide
Chapter 6 Wireless LAN and Authentication Server 129
6.13.6 802.1x + No WEP
Select 802.1x + No WEP from the Security list.
Figure 42 Wireless: 802.1x + No WEP
The following table describes the wireless LAN security labels in this screen.
Authentication
Databases
Click Local User to go to the Local User Database screen where you can view and/or
edit the list of users and passwords. Click RADIUS to go to the RADIUS screen where
you can configure the ZyWALL to check an external RADIUS server
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.
Table 34 Wireless: 802.1x + Static WEP (continued)
LABEL DESCRIPTION
Table 35 Wireless: 802.1x + No WEP
LABEL DESCRIPTION
Security Select 802.1x + No WEP from the drop-down list.
ReAuthenticati
on Timer
(Seconds)
Specify how often wireless stations have to reenter usernames and passwords in order
to stay connected. Enter a time interval between 10 and 9999 seconds.
If wireless station authentication is done using a RADIUS server, the reauthentication
timer on the RADIUS server has priority.
Idle Timeout
(Seconds)
The ZyWALL automatically disconnects a wireless station from the wired network after
a period of inactivity. The wireless station needs to enter the username and password
again before access to the wired network is allowed.
Authentication
Databases
Click Local User to go to the Local User Database screen where you can view and/or
edit the list of users and passwords. Click RADIUS to go to the RADIUS screen where
you can configure the ZyWALL to check an external RADIUS server