ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 244)

ZyWALL 35 User’s Guide
242 Chapter 14 VPN Screens
Figure 115 VPN Rules
The following table describes the labels in this screen.
Table 72 VPN Rules
LABEL DESCRIPTION
# This is the VPN policy index number.
Name This field displays the identification name for this VPN policy.
Active This field displays whether the VPN policy is active or not. A Yes signifies that this
VPN policy is active. No signifies that this VPN policy is not active.
Local IP Address This is the IP address(es) of computer(s) on your local network behind your
ZyWALL.
The same (static) IP address is displayed twice when the Local Address Type field
in the Edit VPN Rule (or Manual Key) screen is configured to Single Address.
The beginning and ending (static) IP addresses, in a range of computers are
displayed when the Local Address Type field in the Edit VPN Rule (or Manual
Key) screen is configured to Range Address.
A (static) IP address and a subnet mask are displayed when the Local Address
Type field in the Edit VPN Rule (or Manual Key) screen is configured to Subnet
Address.
Remote IP
Address
This is the IP address(es) of computer(s) on the remote network behind the remote
IPSec router.
This field displays N/A when the Secure Gateway Address field displays 0.0.0.0.
In this case only the remote IPSec router can initiate the VPN.
The same (static) IP address is displayed twice when the Remote Address Type
field in the Edit VPN Rule (or Manual Key) screen is configured to Single
Address.
The beginning and ending (static) IP addresses, in a range of computers are
displayed when the Remote Address Type field in the Edit VPN Rule (or Manual
Key) screen is configured to Range Address.
A (static) IP address and a subnet mask are displayed when the Remote Address
Type field in the Edit VPN Rule (or Manual Key) screen is configured to Subnet
Address.
Encap. This field displays Tunnel or Transport mode (Tunnel is the default selection).