2 configuring firewall rules – ZyXEL Communications ZyXEL ZyWALL 35 User Manual
Page 195
ZyWALL 35 User’s Guide
Chapter 10 Firewall Screens
193
10.6.2 Configuring Firewall Rules
Follow these directions to create a new rule.
1 In the Rule Summary screen, type the index number for where you want to put the rule.
For example, if you type 6, your new rule becomes number 6 and the previous rule 6 (if
there is one) becomes rule 7.
2 Click Insert to display this screen and refer to the following table for information on the
labels.
Source Address This drop-down list box displays the source addresses or ranges of addresses to
which this firewall rule applies. Please note that a blank source or destination
address is equivalent to Any.
Destination
Address
This drop-down list box displays the destination addresses or ranges of addresses to
which this firewall rule applies. Please note that a blank source or destination
address is equivalent to Any.
Service Type
This drop-down list box displays the services to which this firewall rule applies.
Please note that a blank service type is equivalent to Any.
for more
information.
Action
This is the specified action for that rule, either Block or Forward. Note that Block
means the firewall silently discards the packet.
Schedule
This field tells you whether a schedule is specified (Yes) or not (No).
Log
This field shows you whether a log is created when packets match this rule
(Enabled) or not (Disable).
Alert
This field tells you whether this rule generates an alert (Yes) or not (No) when the
rule is matched.
Modify
Click the edit icon to go to the screen where you can edit the rule.
Click the delete icon to delete an existing firewall rule. A window display asking you
to confirm that you want to delete the firewall rule. Note that subsequent firewall
rules move up by one when you take this action.
Insert
Type the index number for where you want to put a rule. For example, if you type 6,
your new rule becomes number 6 and the previous rule 6 (if there is one) becomes
rule 7.
Click Insert to display this screen and refer to the following table for information on
the fields.
Move
Type a rule’s index number and the number for where you want to put that rule. Click
Move to move the rule to the number that you typed. The ordering of your rules is
important as they are applied in order of their numbering.
Table 60 Rule Summary
LABEL
DESCRIPTION