ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 76)

ZyWALL 35 User’s Guide
74 Chapter 3 Wizard Setup
Figure 12 ISP Parameters : Ethernet Encapsulation
The following table describes the labels in this screen.
Table 10 ISP Parameters : Ethernet Encapsulation
LABEL DESCRIPTION
ISP Parameters
for Internet
Access
Encapsulation You must choose the Ethernet option when the WAN port is used as a regular
Ethernet. Otherwise, choose PPPoE or PPTP for a dial-up connection.
Service Type Choose from Standard, Telstra (RoadRunner Telstra authentication method), RR-
Manager (Roadrunner Manager authentication method), RR-Toshiba (Roadrunner
Toshiba authentication method) or Telia Login.
The following fields are not applicable (N/A) for the Standard service type.
User Name Type the user name given to you by your ISP.
Password Type the password associated with the user name above.
Retype Password Type your password again for confirmation.
Login Server IP
Address
Type the authentication server IP address here if your ISP gave you one.
This field is not available for Telia Login.
Login Server
(Telia Login only)
Type the domain name of the Telia login server, for example login1.telia.com.
Alternatively, click the right mouse button to copy and/or paste the IP address.
Relogin Every
(min) (Telia Login
only)
The Telia server logs the ZyWALL out if the ZyWALL does not log in periodically.
Type the number of minutes from 1 to 59 (30 default) for the ZyWALL to wait
between logins.
Next Click Next to continue.