ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 332)

ZyWALL 35 User’s Guide
330 Chapter 19 Bandwidth Management
Figure 163 Bandwidth Manager: Class Setup
The following table describes the labels in this screen.
19.9.1 Bandwidth Manager Class Configuration
Configure a bandwidth management class in the Class Setup screen. You must use the
Summary screen to enable bandwidth management on an interface before you can configure
classes for that interface.
To add a child class, click BW MGMT, then the Class Setup tab. Click the Add Sub-Class
button to open the following screen.
Table 110 Bandwidth Manager: Class Setup
LABEL DESCRIPTION
Interface Select an interface from the drop-down list box for which you wish to set up classes.
Bandwidth
Management
This field displays whether bandwidth management on the interface you selected in
the field above is enabled (Active) or not (Inactive).
Add Sub-Class Click Add Sub-class to add a sub-class.
Edit Click Edit to configure the selected class. You cannot edit the root class.
Delete Click Delete to delete the class and all its sub-classes. You cannot delete the root
class.
Statistics Click Statistics to display the status of the selected class.