ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 529)

ZyWALL 35 User’s Guide
Chapter 39 Firmware and Configuration File Maintenance 527
39.4.2 Restore Using FTP Session Example
Figure 330 Restore Using FTP Session Example
Refer to the File Maintenance Over WAN section to read about configurations that disallow
TFTP and FTP over WAN.
39.4.3 Restore Via Console Port
Restore configuration via console port by following the HyperTerminal procedure shown next.
Procedures using other serial communications programs should be similar.
1 Display menu 24.6 and enter “y” at the following screen.
Figure 331 System Maintenance: Restore Configuration
2 The following screen indicates that the Xmodem download has started.
Figure 332 System Maintenance: Starting Xmodem Download Screen
3 Run the HyperTerminal program by clicking Transfer, then Send File as shown in the
following screen.
ftp> put config.rom rom-0
200 Port command okay
150 Opening data connection for STOR rom-0
226 File received OK
221 Goodbye for writing flash
ftp: 16384 bytes sent in 0.06Seconds 273.07Kbytes/sec.
ftp>quit
Ready to restore Configuration via Xmodem.
Do you want to continue (y/n):
Starting XMODEM download (CRC mode) ...CCCCCCCCC