ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 544)

ZyWALL 35 User’s Guide
542 Chapter 40 System Maintenance Menus 8 to 10
40.3.1 Resetting the Time
The ZyWALL resets the time in three instances:
• On leaving menu 24.10 after making changes.
• When the ZyWALL starts up, if there is a timeserver configured in menu 24.10.
• 24-hour intervals after starting.
End Date (mm-
nth-week-hr)
Configure the day and time when Daylight Saving Time ends if you selected Yes in
the Daylight Saving field. The o'clock field uses the 24 hour format. Here are a
couple of examples:
Daylight Saving Time ends in the United States on the last Sunday of October.
Each time zone in the United States stops using Daylight Saving Time at 2 A.M.
local time. So in the United States you would select Last, Sunday, October and
type 2 in the o'clock field.
Daylight Saving Time ends in the European Union on the last Sunday of October.
All of the time zones in the European Union stop using Daylight Saving Time at the
same moment (1 A.M. GMT or UTC). So in the European Union you would select
Last, Sunday, October. The time you type in the o'clock field depends on your
time zone. In Germany for instance, you would type 2 because Germany's time
zone is one hour ahead of GMT or UTC (GMT+1).
Once you have filled in this menu, press [ENTER] at the message “Press ENTER to Confirm or ESC to
Cancel“ to save your configuration, or press [ESC] to cancel.
Table 200 Menu 24.10 System Maintenance: Time and Date Setting
FIELD DESCRIPTION