Table 193 system maintenance menu diagnostic – ZyXEL Communications ZyXEL ZyWALL 35 User Manual
Page 519
ZyWALL 35 User’s Guide
Chapter 38 System Information & Diagnosis
517
Table 193 System Maintenance Menu Diagnostic
FIELD
DESCRIPTION
Ping Host
Enter 1 to ping any machine (with an IP address) on your LAN or WAN. Enter
its IP address in the Host IP Address field below.
WAN DHCP Release
Enter 2 to release your WAN DHCP settings.
WAN DHCP Renewal
Enter 3 to renew your WAN DHCP settings.
Internet Setup Test
Enter 4 to test the Internet setup. You can also test the Internet setup in
Menu 4 - Internet Access. Please refer to
for
more details. This feature is only available for dial-up connections using
PPPoE or PPTP encapsulation.
Reboot System
Enter 11 to reboot the ZyWALL.
WAN
If you entered 2 or 3 in the Enter Menu Selection Number field, enter the
number of the WAN port in this field.
Host IP Address
If you entered 1in the Enter Menu Selection Number field, then enter the IP
address of the computer you want to ping in this field.
Enter the number of the selection you would like to perform or press [ESC] to cancel.