ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 83)

ZyWALL 35 User’s Guide
Chapter 3 Wizard Setup 81
The following table describes the labels in this screen.
3.2.3 Internet Access Wizard Setup Complete
Well done! You have successfully set up your ZyWALL to operate on your network and
access the Internet.
Table 15 WAN and DNS
LABEL DESCRIPTION
WAN IP Address
Assignment
Get automatically from
ISP
Select this option If your ISP did not assign you a fixed IP address. This is
the default selection.
Use fixed IP address Select this option If the ISP assigned a fixed IP address.
My WAN IP Address Enter your WAN IP address in this field if you selected Use fixed IP
address.
My WAN IP Subnet Mask Enter the IP subnet mask in this field if you selected Use fixed IP address.
This field is available when you select Ethernet encapsulation in the
previous wizard screen.
Remote IP Subnet Mask Enter the gateway IP subnet mask (if your ISP gave you one) in this field if
you selected Use fixed IP address. This field is not available when you
select Ethernet encapsulation in the previous wizard screen.
Remote/Gateway IP
Address
Enter the gateway IP address in this field if you selected Use fixed IP
address.
System DNS Servers DNS (Domain Name System) is for mapping a domain name to its
corresponding IP address and vice versa, e.g., the IP address of
www.zyxel.com is 204.217.0.2. The DNS server is extremely important
because without it, you must know the IP address of a computer before you
can access it.
First DNS Server
Second DNS Server
Third DNS Server Select From ISP if your ISP dynamically assigns DNS server information
(and the ZyWALL's WAN IP address). The field to the right displays the
(read-only) DNS server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the
DNS server's IP address in the field to the right.
Select None if you do not want to configure DNS servers. If you do not
configure a system DNS server, you must use IP addresses when
configuring VPN, DDNS and the time server.
WAN MAC Address The MAC address field allows you to configure the WAN port's MAC
Address by either using the factory default or cloning the MAC address from
a computer on your LAN.
Factory Default Select this option to use the factory assigned default MAC Address.
Spoof this Computer's
MAC Address - IP
Address
Select this option and enter the IP address of the computer on the LAN
whose MAC you are cloning. Once it is successfully configured, the address
will be copied to the rom file (ZyNOS configuration file). It will not change
unless you change the setting or upload a different rom file. It is advisable to
clone the MAC address from a computer on your LAN even if your ISP does
not presently require MAC address authentication.
Back Click Back to return to the previous screen.
Finish Click Finish to complete and save the wizard setup.