Table 5 screens summary – ZyXEL Communications ZyXEL ZyWALL 35 User Manual
Page 68

ZyWALL 35 User’s Guide
66
Chapter 2 Introducing the Web Configurator
Table Key: An O in a mode’s column shows that the device mode has the specified feature.
The information in this table was correct at the time of writing, although it may be subject to
change.
The following table describes the sub-menus.
Remote Management
O
O
UPnP
O
Logs
O
O
Maintenance
O
O
Table 5 Screens Summary
LINK
TAB
FUNCTION
HOME
This screen shows the ZyWALL’s general device and network
status information. Use this screen to access the wizards, statistics
and DHCP table.
LAN
LAN
Use this screen to configure LAN DHCP and TCP/IP settings.
Static DHCP
Use this screen to assign fixed IP addresses on the LAN.
IP Alias
Use this screen to partition your LAN interface into subnets.
BRIDGE
Bridge
Use this screen to change the bridge settings on the ZyWALL.
Port Roles
Use this screen to change the LAN/DMZ port roles
WIRELESS LAN Wireless
Use this screen to configure the wireless LAN settings and WLAN
authentication/security settings.
MAC Filter
Use this screen to change MAC filter settings on the ZyWALL
WAN
General
This screen allows you to configure load balancing, route priority
and traffic redirect properties.
WAN1
Use this screen to configure ZyWALL WAN1 port for internet
access.
WAN2
Use this screen to change your WAN2 port settings.
Traffic Redirect Use this screen to configure your traffic redirect properties and
parameters.
Dial Backup
Use this screen to configure the backup WAN dial-up connection
DMZ
DMZ
Use this screen to configure your DMZ connection.
IP Alias
Use this screen to partition your DMZ interface into subnets
FIREWALL
Default Rule
Use this screen to activate/deactivate the firewall and the direction
of network traffic to which to apply the rule
Rule Summary This screen shows a summary of the firewall rules, and allows you
to edit/add a firewall rule.
Anti-Probing
Use this screen to change your anti-probing settings.
Threshold
Use this screen to configure the threshold for DoS attacks.
CONTENT
FILTER
General
This screen allows you to enable content filtering and block certain
web features.
Table 4 Feature Comparison
FEATURE
BRIDGE MODE
ROUTER MODE