ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 160)

ZyWALL 35 User’s Guide
158 Chapter 7 WAN Screens
Figure 60 Traffic Redirect
The following table describes the labels in this screen.
7.11 Configuring Dial Backup
To change your ZyWALL’s Dial Backup settings, click WAN, then the Dial Backup tab. The
screen appears as shown.
Table 49 Traffic Redirect
LABEL DESCRIPTION
Active Select this check box to have the ZyWALL use traffic redirect if the normal WAN
connection goes down.
Backup
Gateway IP
Address
Type the IP address of your backup gateway in dotted decimal notation. The ZyWALL
automatically forwards traffic to this IP address if the ZyWALL's Internet connection
terminates.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.