ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 527)

ZyWALL 35 User’s Guide
Chapter 39 Firmware and Configuration File Maintenance 525
Figure 327 Backup Configuration Example
Type a location for storing the configuration file or click Browse to look for one.
Choose the Xmodem protocol.
Then click Receive.
4 After a successful backup you will see the following screen. Press any key to return to the
SMT menu.
Figure 328 Successful Backup Confirmation Screen
39.4 Restore Configuration
This section shows you how to restore a previously saved configuration. Note that this
function erases the current configuration before restoring a previous back up configuration;
please do not attempt to restore unless you have a backup configuration file stored on disk.
FTP is the preferred method for restoring your current computer configuration to your
ZyWALL since FTP is faster. Please note that you must wait for the system to automatically
restart after the file transfer is complete.
** Backup Configuration completed. OK.
### Hit any key to continue.###
Note: WARNING!
Do not interrupt the file transfer process as this may
PERMANENTLY DAMAGE YOUR ZyWALL. When the Restore
Configuration process is complete, the ZyWALL will
automatically restart.