ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 410)

ZyWALL 35 User’s Guide
408 Chapter 24 Maintenance
If the upload was not successful, the following screen will appear. Click Return to go back to
the Configuration screen.
Figure 221 Configuration Upload Error
24.8.3 Back to Factory Defaults
Pressing the Reset button in this section clears all user-entered configuration information and
returns the ZyWALL to its factory defaults as shown on the screen. The following warning
screen will appear.
Figure 222 Reset Warning Message
You can also press the RESET button on the rear panel to reset the factory defaults of your
ZyWALL. Refer to
the Resetting the ZyWALL section for more information on the RESET
button.
24.9 Restart Screen
System restart allows you to reboot the ZyWALL without turning the power off.
Click MAINTENANCE, and then Restart. Click Restart to have the ZyWALL reboot. This
does not affect the ZyWALL's configuration.