ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 78)

ZyWALL 35 User’s Guide
76 Chapter 3 Wizard Setup
Figure 13 ISP Parameters : PPPoE Encapsulation
The following table describes the labels in this screen.
3.2.1.3 PPTP Encapsulation
Point-to-Point Tunneling Protocol (PPTP) is a network protocol that enables transfers of data
from a remote client to a private server, creating a Virtual Private Network (VPN) using TCP/
IP-based networks.
Table 11 ISP Parameters : PPPoE Encapsulation
LABEL DESCRIPTION
ISP Parameter for
Internet Access
Encapsulation Choose an encapsulation method from the pull-down list box. PPP over Ethernet
forms a dial-up connection.
Service Name Type the name of your service provider.
User Name Type the user name given to you by your ISP.
Password Type the password associated with the user name above.
Retype Password Type your password again for confirmation.
Nailed-Up
Connection
Select Nailed-Up Connection if you do not want the connection to time out.
Idle Timeout Type the time in seconds that elapses before the router automatically disconnects
from the PPPoE server. The default time is 100 seconds.
Next Click Next to continue.