ZyXEL Communications ZyXEL ZyWALL 35 - Manual (Page 469)

ZyWALL 35 User’s Guide
Chapter 33 IP Static Route Setup 467
C
H A P T E R
33
IP Static Route Setup
This chapter shows you how to configure static routes with your ZyWALL.
33.1 IP Static Route Setup
Enter 12 from the main menu. Select one of the IP static routes as shown next to configure IP
static routes in menu 12.1.
Figure 269 Menu 12: IP Static Route Setup
Now, enter the index number of the static route that you want to configure.
Note: The first static route entries is for the default WAN route
and cannot be modified or deleted. The name of the default
static route is left blank unless you configure a static WAN IP
address. The route name changes from “default” to “-default”
after you change the static WAN IP address to a dynamic WAN
IP address, indicating the static route is inactive.
Menu 12 - IP Static Route Setup
1. ________ 16. ________ 31. ________ 46. ________
2. ________ 17. ________ 32. ________ 47. ________
3. ________ 18. ________ 33. ________ 48. ________
4. ________ 19. ________ 34. ________
5. ________ 20. ________ 35. ________
6. ________ 21. ________ 36. ________
7. ________ 22. ________ 37. ________
8. ________ 23. ________ 38. ________
9. ________ 24. ________ 39. ________
10. ________ 25. ________ 40. ________
11. ________ 26. ________ 41. ________
12. ________ 27. ________ 42. ________
13. ________ 28. ________ 43. ________
14. ________ 29. ________ 44. ________
15. ________ 30. ________ 45. ________
Enter selection number: