3 ipsec setup – ZyXEL Communications ZyXEL ZyWALL 35 User Manual

Page 564

Advertising
background image

ZyWALL 35 User’s Guide

562

Chapter 44 VPN/IPSec Setup

44.3 IPSec Setup

Select Edit in the Select Command field; type the index number of a rule in the Select Rule
field and press [ENTER] to edit the VPN using the menu shown next.

Addr End /

Mask

When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to Single, this is

the same (static) IP address as in the Remote Addr Start field.
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to Range, this is

the end (static) IP address, in a range of computers on the network behind the remote

IPSec router.
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured to SUBNET, this

is a subnet mask on the network behind the remote IPSec router.
This field displays N/A when you configure the Secure Gw Addr field in SMT 27.1.1 to

0.0.0.0.

Secure GW

Addr

This is the WAN IP address or the domain name (up to the first 15 characters are

displayed) of the IPSec router with which you are making the VPN connection. This field

displays 0.0.0.0 when you configure the Secure Gw Addr field in SMT 27.1.1 to

0.0.0.0.

Select

Command

Press [SPACE BAR] to choose from None, Edit, Delete, Go To Rule, Next Page or

Previous Page and then press [ENTER]. You must select a rule in the next field when

you choose the Edit, Delete or Go To commands.
Select None and then press [ENTER] to go to the “Press ENTER to Confirm…” prompt.
Use Edit to create or edit a rule. Use Delete to remove a rule. To edit or delete a rule,

first make sure you are on the correct page. When a VPN rule is deleted, subsequent

rules do not move up in the page list.
Use Go To Rule to view the page where your desired rule is listed.
Select Next Page or Previous Page to view the next or previous page of rules

(respectively).

Select Rule

Type the VPN rule index number you wish to edit or delete and then press [ENTER].

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to

Confirm…” to save your configuration, or press [ESC] at any time to cancel.

Table 207 Menu 27.1: IPSec Summary (continued)

FIELD

DESCRIPTION

Advertising