IntelliTrack Inventory Shipping Receiving Picking (ISRP) - Manual (Page 120)

I NTELLI T RACK ISRP V 8.1
User Manual
92
Note: If multiple units of measure is enabled (System Options form/Fea-
tures tab), you must enter the UOM for the new item in the Units of Mea-
sure tab before exiting the Item Data form. Refer to
“Establishing an Item
Unit of Measure Range” on page 96 for more information on units of mea-
sure.
Adding a Picture of the Item
When you enable the Pictures option in the System Options form\Options
tab, you are able to link an image file of the item to the item number in the
Item Data form (for more information about the Pictures option, please
refer to
“Setting System Options” on page 32 ). The image file must be a
supported image file type (.wmf, .emb, .dib, .bmp, .ico, .BMP, .EPS, .GIF,
.JPG, .PCT, .PNG, .WMF) in order to import it into the application. The
ISRP application directory (C:\Program Files\Intelli-
Track\ISRP) contains an Images folder to store your image files; how-
ever, you may import image files from any directory on the network.
Note: The ISRP application references the image file; this means that the
image file does not need to be placed on each individual PC that uses the
application. When placed in a single network directory that is available to
all users, the image file can be referenced by all users from this directory
on the Item Data form.
To add a picture of an item in the Item Data form, the form must be in Add
or Edit mode. If the form is in Add mode, enter the item information such
as item number and description before adding the picture. If the form is in
Edit mode, this information will already be entered in the form.
1. In the Item Master tab, double-click inside the empty box to the right
of the Comments area of the form.