IntelliTrack Inventory Shipping Receiving Picking (ISRP) - Manual (Page 213)

Chapter 10
Import and Export Utility
185
1. Click the drop-down arrow in the Interface field and select Picking
Import.
2. Set the time interval, if desired, for importing data to the specified file
location. Enter the amount of time in the Interval field and then select
the parameter: Hours, Minutes, or Seconds, by selecting the radio but-
ton next to the desired choice. Data will be imported automatically per
the Interval setting. Entering a zero (0) in the Interval field discontin-
ues this service.
3. Click the ellipsis button (...) in the Input filename field and navigate to
the import file location to select it, or enter it in this field.
4. Next, select the file type. Click the radio button next to Tab Delimited
if this is a tab delimited file. Click the radio button next to Fixed Width
if this is a fixed width file.
5. Enter the position of each field that is to be included. Enter a zero (0) to
exclude a field. Verify the order by clicking in the Position column
heading. The Site, Customer ID, and Ship To ID selections are avail-
able based on the application option settings in the IntelliTrack ISRP
Workstation application.
6. If this is a fixed width file, a length entry must be entered in the Length
field for each required field.
7. Select the Do It button to import the picking order. If the import is
unsuccessful an error log is displayed.
8. Select the View/Preview button to display the imported file.