IntelliTrack Inventory Management - Manual (Page 328)

I NTELLI T RACK I NVENTORY V 8.1
User Manual
302
Overview
After you have installed the IntelliTrack workstation application and con-
figured IIS (depending on your setup this will be done automatically dur-
ing IntelliTrack installation with the Create IIS Dependencies Utility or
manually after IntelliTrack installation), test your IIS setup in the Batch
Synchronization Utility to make sure it is configured properly.
Important: The setup outlined in this section refers to DMS CE Batch
setup.
Reaching the Batch Synchronization Utility
Note: The Batch Synchronization Utility is reached through the worksta-
tion application. Please refer to your Quick Start Guide for information
about installing the workstation application.
After the workstation installation is complete, you may access the DMS
Batch Synchronization Utility through the workstation application.
1. To open the DMS workstation, click Start > Programs > IntelliTrack
> DMS > Inventory > Inventory workstation. The DMS application
appears.
2. Log into the application at the Login dialog. The Dashboard tabbed
window appears in the Work Area of the window.
3. From the ribbon, select Portable > Synchronize CE Device > Syn-
chronize CE Device.
4. The DMS Batch Synchronization Portable Utility appears.
2287.book Page 302 Thursday, July 7, 2011 4:45 PM