IntelliTrack Inventory Management - Manual (Page 40)

I NTELLI T RACK I NVENTORY V 8.1
User Manual
14
Please refer to “Remote Data Access (RDA) Components” on page 17
for more information.
8. After you setup Remote Data Access and install IntelliTrack, test your
setup by going to the DMS Batch Synchronization Utility and testing
the Sync URL setting. Please refer to
“Sync URL Setting” on page 303
for more information.
9. If you are using a Firewall, specific ports must be set as exceptions.
Please refer to
“Applying Firewall Exceptions” on page 31 for more
information.
10. Make sure that User Account Control (UAC) is disabled.
11. Determine the IntelliTrack Device Installation that you will use for
installing the IntelliTrack DMS application to your device. Please refer
to
“Determining your Device Installation” on page 154 .
Batch
Installation
Prerequisites
for Windows
XP/Windows
Server 2003 If you are using Windows XP/Windows Server 2003, follow these basic
steps for batch installation preparation.
1. Familiarize yourself with the RDA components “Remote Data Access
(RDA) Components” on page 17 for more information.
2. Determine your RDA configuration. Please refer to “RDA Configura-
tion” on page 20 for more information.
3. Make sure that IIS is installed and operational. You will use IIS v5.1
with the Windows XP Professional Operating System. Please refer to
your Windows documentation for more information on installing IIS.
4. Install Microsoft ActiveSync and establish a partnership with your
device. Make sure that the connection setting is set for “work net-
work.” Please refer to
“Installing Microsoft ActiveSync on your Desktop
Computer” on page 27 , “ActiveSync Work Network Connection Setting”
on page 27 , and “Setting Up a Sync Relationship” on page 28 for more
information.
5. If you are using a Firewall, specific ports must be set as exceptions.
Please refer to
“Applying Firewall Exceptions” on page 31 .
6. Test your IIS setup after you install IntelliTrack by going to the DMS
Batch Synchronization Utility and testing the Sync URL setting. Please
refer to
“Sync URL Setting” on page 303 .
7. Determine your Device Installation. Please refer to “Determining your
Device Installation” on page 154 .
2287.book Page 14 Thursday, July 7, 2011 4:45 PM