IntelliTrack Inventory Management - Manual (Page 99)

Chapter 5
System Setup
73
6. When you are finished, click the Close button found along the bottom
of the form to close the Change Password form and set the new pass-
word. (Clicking the Cancel button will cancel the password change.)
Defining the Admin Password
The Admin password is not defined at system startup (it is blank). To
define the Admin password, refer to the steps below.
Warning: Be sure to keep a record of the password in a safe place. If the
password is forgotten or lost, only an experienced Access programmer will
be able to regain the Admin rights for your system.
1. Log into the system as the Admin user.
2. From the ribbon, select the Manage > Security > Change Password
option.
3. The Change Password form appears for the Admin user.
4. Leave the Old Password field blank (there is currently no password
defined for the user Admin).
5. Enter an Admin password in the New Password field.
6. Verify the password in the Verify field.
7. Click the Close button to close the form and set the new admin pass-
word.
Deleting a
User You are able to delete a user from the system. To delete a user from the
application, refer to the steps below.
1. Click Tools > Security > Users option from the ribbon.
2. The Users form appears.
3. Click the user whom you want to delete from the system.
2287.book Page 73 Thursday, July 7, 2011 4:45 PM