IntelliTrack Inventory Management - Manual (Page 82)

I NTELLI T RACK I NVENTORY V 8.1
User Manual
56
Introduction
Before you begin using IntelliTrack DMS Inventory to assist with storing,
tracking, and managing your perpetual inventory, activate the features and
options that you intend to use and set security options and choose system
language and date and time formats. All of the functions to configure the
application ar located in the Tools ribbon.
System Setup
The Options form contains four areas:
• Company Information
• Options
• International Options
• Pull Down Options
Each area of the form and the options available in it are discussed in the
sections that follow.
The selections found in the system Setup form are stored in the shared data
file DATAINE80.MDF and affect all users of the application.
To open the Setup form select Tools Command Tab > Setup Command
Set > Setup selection.
The setup form appears with the Company Information portion to the
front. To move to different setup areas of the form, select a button found
along the bottom of the form.
Setup Selection
2287.book Page 56 Thursday, July 7, 2011 4:45 PM